The optical gain lever: A novel gain mechanism in the direct modulation of quantum well semiconductor lasers

A new gain mechanism active in certain quantum well laser diode structures is demonstrated and explained theoretically. It enhances the modulation amplitude produced by either optical or electrical modulation of quantum well structures. In the devices tested, power gains of 6 dB were measured from low frequency to frequencies of several gigahertz. Higher gains may be possible in optimized structures

Development of an Engineering Diagram for Additively Manufactured Austenitic Stainless Steel Alloys

Austenitic stainless steels are the most widely applied types of stainless steels, due to their good weldability and high corrosion resistance. A number of engineering diagrams exist for the purpose of providing insight into the behavior of these steels. Examples of these diagrams are constitution diagrams (aka Schaeffler Diagrams) which are used to approximate the solidification path of the alloy and the amount of retained ferrite in the solidified matrix. Other diagrams are the Suutala diagram, which approximates cracking susceptibility, and microstructural maps, which predict the solidification path by varying a processing parameter, such as cooling rate. By combining these diagrams, a much more concrete conclusion can be made as to the behavior of a particular steel. This approach could be used to determine differences in behaviors between two different compositions. The developed diagram would be intended for use with rapid solidification phenomena as observed in the selective laser melting process

Single seed sorting technology and its interaction with processing for food, malt, feed and industrial markets

Non-Peer Reviewe

Recyclability of 304L Stainless Steel in the Selective Laser Melting Process

During part fabrication by selective laser melting (SLM), a powder-bed fusion process in Additive Manufacturing (AM), a large amount of energy is input from the laser into the melt pool, causing generation of spatter and condensate, both of which have the potential to settle in the surrounding powder-bed compromising its reusability. In this study, 304L stainless steel powder is subjected to five reuses in the SLM process to assess its recyclability through characterization of both powder and mechanical properties. Powder was characterized morphologically by particle size distribution measurements, oxygen content with inert gas fusion analysis, and phase identification by X-ray diffraction. The evolution of powder properties with reuse was also correlated to tensile properties of the as-built material. The results show that reused powder coarsens and accrues more oxygen with each reuse. The effects of powder coarsening and oxygen increase on the tensile properties of fabricated parts are being investigated

Investigation of Mechanical Properties of Parts Fabricated with Gas- and Water-Atomized 304L Stainless Steel Powder in the Laser Powder Bed Fusion Process

The use of gas-atomized powder as the feedstock material for the laser powder bed fusion (LPBF) process is common in the additive manufacturing (AM) community. Although gas-atomization produces powder with high sphericity, its relatively expensive production cost is a downside for application in AM processes. Water atomization of powder may overcome this limitation due to its low-cost relative to the gas-atomization process. In this work, gas- and water-atomized 304L stainless steel powders were morphologically characterized through scanning electron microscopy (SEM). The water-atomized powder had a wider particle size distribution and exhibited less sphericity. Measuring powder flowability using the Revolution Powder Analyzer (RPA) indicated that the water-atomized powder had less flowability than the gas-atomized powder. Through examining the mechanical properties of LPBF fabricated parts using tensile tests, the gas-atomized powder had significantly higher yield tensile strength and elongation than the water-atomized powder; however, their ultimate tensile strengths were not significantly different

Pleasure and pedagogy: the consumption of DVD add-ons among Irish teenagers

This article addresses the issue of young people and media use in the digital age, more specifically the interconnection between new media pleasures and pedagogy as they relate to the consumption of DVD add-ons. Arguing against the view of new media as having predominantly detrimental effects on young people, the authors claim that new media can enable young people to develop media literacy skills and are of the view that media literacy strategies must be based on an understanding and legitimating of young people's use patterns and pleasures. The discussion is based on a pilot research project on the use patterns and pleasures of use with a sample of Irish teenagers. They found that DVDs were used predominantly in the home context, and that, while there was variability in use between the groups, overall they developed critical literacy skills and competences which were interwoven into their social life and projects of identity construction. The authors suggest that these findings could be used to develop DVDs and their add-on features as a learning resource in the more formal educational setting and they go on to outline the potential teaching benefits of their use across a range of pedagogical areas

Observations of Low Frequency Solar Radio Bursts from the Rosse Solar-Terrestrial Observatory

The Rosse Solar-Terrestrial Observatory (RSTO; www.rosseobservatory.ie) was established at Birr Castle, Co. Offaly, Ireland (53 05'38.9", 7 55'12.7") in 2010 to study solar radio bursts and the response of the Earth's ionosphere and geomagnetic field. To date, three Compound Astronomical Low-cost Low-frequency Instrument for Spectroscopy and Transportable Observatory (CALLISTO) spectrometers have been installed, with the capability of observing in the frequency range 10-870 MHz. The receivers are fed simultaneously by biconical and log-periodic antennas. Nominally, frequency spectra in the range 10-400 MHz are obtained with 4 sweeps per second over 600 channels. Here, we describe the RSTO solar radio spectrometer set-up, and present dynamic spectra of a sample of Type II, III and IV radio bursts. In particular, we describe fine-scale structure observed in Type II bursts, including band splitting and rapidly varying herringbone features

Performance Evaluation Of Composite Sandwich Structures With Additively Manufactured Aluminum Honeycomb Cores With Increased Bonding Surface Area

Modern aerostructures, including wings and fuselages, increasingly feature sandwich structures due to their high-energy absorption, low weight, and high flexural stiffness. The face sheet of these sandwich structures are typically thin composite laminates with interior honeycombs made of Nomex or aluminum. Standard cores are structurally efficient, but their design cannot be varied throughout the structure. With additive manufacturing (AM) technology, these core geometries can be altered to meet the design requirements that are not met in standard honeycomb cores. This study used a modified aluminum honeycomb core, with increased surface area on the top and bottom, as the core material in sandwich panels. The modified honeycomb core was produced through the laser powder bed fusion method. The behavior of the modified sandwich composite panels was evaluated through three-point bend, edgewise compression, and impact tests, and their performance was compared to that of a conventional honeycomb core sandwich panel. The three-point bend test results indicated that the sandwich structure\u27s ultimate shear strength improved by 12.6% with the modified honeycomb core. Additionally, the displacement at the failure of the structure increased by 11%. The edgewise compression tests showed that the ultimate edgewise compressive strength improved by 19.1% when using the modified core. The impact test results revealed that the peak force increased by 8% and the energy-absorbing capacity of the sandwich structure increased by 20% with the use of the modified honeycomb core